All QuantSeq FWD and REV kits are supplied with an activation code to access Lexogen solutions for QuantSeq data analysis Kangooroo.
In the new QuantSeq packaging system, activation codes a code can be found on a label located on the cardboard above the microtube holder (Figure 1; or one of the holders, if the kit contains more than one). The microtube holder/s can be found inside the Library Generation Module box (stored at -20 °C).
Figure 1 | Location of the Activation Code sticker on the QuantSeq V2 Kit microtube holder.
In the previous packaging system of the QuantSeq FWD V1 (Cat. No. 015) and QuantSeq REV (Cat. No. 016) kits, the activation codes were printed on a sticker that was attached to the side of the small reagent box, (stored at -20 °C) which came inside the main QuantSeq Kit box (see Figure 2).
In the previous packaging system of the QuantSeq FWD with UDI V1 kits (Cat. No. 113 – 115, and 129 – 131), the activation code could be found on a card inside the Library Generation Module reagent box.
...
Figure 2| Location of the Activation Code sticker on the inner QuantSeq Kit reagent box.
Activation codes Codes for additional runs can be purchased from Lexogen (Cat. No. 209 and 210) by contacting the sales team at sales@lexogen.com. For further questions, please contact support@lexogen.com.
ATTENTION!Activation codes Codes are valid 2 years after the purchase of the kit.
ATTENTION! The input file size is limited to 1.5 GB per fastq(.gz) file.
If you have larger input files, please check this FAQ: My FASTQ files are bigger than 1.5 GB what should I do? https://faqs.lexogen.com/faq/my-fastq-files-are-bigger-than-1-5-gb-what-should- or contact support@lexogen.com.